Download MICROS e7 Version 1.5 ReadMe First

MICROS e7
Downloading the MICROS e7 Product
5. Click on Close.
Note
The MICROS e7 installation can be started from the directory
where you extracted files in these previous steps (i.e. c:\e7CD)
using the instructions below.
or
These extracted MICROS e7 files can be burned onto a CD.
Then, Launch.exe can be executed to start the product
installation.
Installing the MICROS e7 Files to a PC
Note
Once the CAL software is installed on the PC, the system will
automatically upgrade each workstation. Make sure that each
workstation has at least 22 MB of free compact flash space
before installing the software on the PC.
1. Open Windows Explorer on the PC.
2. Locate the MICROS e7 software directory (i.e. c:\e7CD) that you
extracted in the previous steps.
3. Run Launch.exe.
4. Select Install Applications from the Product Installation screen.
5. To configure the PC as a CAL server (for the PC to update the
workstations), select Install CAL Server.
6. Click Finish.
Warning
After the CAL server install, the workstation operating system
images are automatically updated, if necessary. In MICROS e7
Version 1.0, the package had to be selected from each
workstation to update the clients. This is no longer necessary
with MICROS e7 Version 1.5 or later.
7. Select Install e7 Software.
Version 1.5
MD0007-004
January 20, 2005
Page 19 of 22