Download 1 - Yamaha Robotics

Transcript
3-2 Installing the robot
3-2-2
Installation Using The T-Slots
The robot body can also be mounted by using the T-slots located on the side of the robot body (see
Fig. 3). Place nuts in the T-slots, then use bolts to secure the body.
(Fig. 3)
3
* Mounting nuts
w
Installation and Connections
* Mounting bolts
YMS45: M3
YMS55: M4
Use commercially available square nuts (material: steel or SUS).
WARNING
BE SURE TO USE STEEL OR SUS SQUARE NUTS. USING SQUARE NUTS OF OTHER MATERIALS CAN
CAUSE THREAD FAILURE AND BEARING SURFACE PITTING, ETC., RESULTING IN INSUFFICIENT
MOUNTING TIGHTNESS.
3-
3