1
Download PDF - IBM Redbooks
Transcript
When you order the 8260, the following components will be included in the 8260 chassis that is shipped to you: • • • • • • • • • • One controller module One power supply One power supply bay cover One AC power cord Three fan units One cable tray One rack mount kit One rubber feet kit Six blank dual-slot filler plates Three blank single-slot filler plates Additionally, you can order the following features to be included in your 8260: • Up to three additional power supplies for 8260 Model 017 and Model A17 or up to two additional power supplies for the 8260 Model 010 or Model A10. • 8250 adapter kit • Distributed Management Module (DMM) • Ethernet Carrier Distributed Management Module (EC-DMM) • Ethernet Media Access Control (E-MAC) daughter card • Token-Ring Media Access Control (T-MAC) daughter card • Ethernet Modules: − − − − − − − − • 8260 Ethernet 36-port 10Base-T module 8260 Ethernet 24-port 10Base-T module 8260 Ethernet 20-port 10Base-T module 8260 Ethernet 40-port 10Base-T module 8260 Ethernet 10-port 10Base-FB module 8260 Ethernet Flexible Concentration Module - 8260 2-port FB/FL module - 8260 4-port UTP module - 8260 3-port BNC module - 8260 3-port AUI module 8260 Multiprotocol Interconnect module 8260 Ethernet Security daughter card Token-ring Modules: − − − − − 18-port active per-port switching module 18-port active module-switching module 20-port passive module-switching module Dual fiber repeater module Jitter Attenuator daughter card • Multiprotocol Interconnect Module • ATM Modules: − Refer to 5.3, “The IBM 8260 Multiprotocol Intelligent Switching Hub” on page 250 The 8260 can be managed out-of-band using an ASCII console attached locally or via modem to the management module. Additionally, you may manage the 8260 via SNMP using the Hub Manager Program for AIX. Chapter 2. H u b s 163
