Download Picomotor Drivers
Transcript
pico880113H.fm Page 32 Thursday, September 20, 2001 5:50 PM 4. Replace fuses F1, F3, and F5 as necessary. The replacements should be as follows: Model 8701 Single-Axis Driver Fuses Fuse Voltage Rating Current Rating Type F1 250 V 0.5 A Fast F3 250 V 0.7 A Slow F5 250 V 0.7 A Slow 5. Reassemble the unit by replacing the top cover and screws. Changing Fuses in the Multi-Axis Driver: 1. Unplug the power supply. 2. From the bottom of the unit, remove the four screws that hold the two halves of the case together. 3. Remove the top cover. Figure 14: Multi-axis driver with top cover and top PC board removed Selector switch cables Fuses: F5 F3 F1 Pic om oto r Dri ver 8801 Mul ti-A xis Driv er Po wer Mad e in US A 4. Unplug the three selector-switch cables from the top PC board. 32 • Appendix II: Replacing the Fuses NEW FOCUS, Inc.