Download Picomotor Drivers

Transcript
pico880113H.fm Page 32 Thursday, September 20, 2001 5:50 PM
4. Replace fuses F1, F3, and F5 as necessary. The
replacements should be as follows:
Model 8701 Single-Axis Driver Fuses
Fuse
Voltage
Rating
Current
Rating
Type
F1
250 V
0.5 A
Fast
F3
250 V
0.7 A
Slow
F5
250 V
0.7 A
Slow
5. Reassemble the unit by replacing the top cover and
screws.
Changing Fuses in the Multi-Axis Driver:
1. Unplug the power supply.
2. From the bottom of the unit, remove the four
screws that hold the two halves of the case
together.
3. Remove the top cover.
Figure 14:
Multi-axis
driver with
top cover and
top PC board
removed
Selector
switch
cables
Fuses:
F5
F3
F1
Pic
om
oto
r
Dri
ver
8801
Mul
ti-A
xis
Driv
er
Po
wer
Mad
e in
US
A
4. Unplug the three selector-switch cables from the
top PC board.
32 • Appendix II: Replacing the Fuses
NEW FOCUS, Inc.