Download A1. COORDINATES SYSTEM A2. COMMAND CATEGORIES

A5. SYSTEM LEVEL COMMANDS
Command
Description
Parameter Range
This group of commands is used to set the printing related parameters or environment for
<ESC>KI:_
Sets horizontal shift.
_ is a binary signed byte and in
the current or subsequent labels. They will be reset after restarting the printer or by
terms of pixels. 00H ~ 7FH are
other related system level commands. Unlike system setting commands, these commands
positive and 80H ~ FFH are
will not be saved into EEPROM.
negative.
Command
Description
This command shifts the image print position in the X coordinate.
<STX>A
Sets date and time
**
This command sets the data and time. It takes effect only when the RTC(real time clock)
This command is for X2000+/X3000+/G6000/G7000 only..
Default
board is installed. In general the RTC board must be set at the first time you use it.
Command
Description
<ESC>@0
Clears the flash memory that is used
<STX>AwmmddyyyyhhMMjj
for soft fonts, forms or graphics.
Location
Digit no.
Description
This command clears the flash memory. All objects in the flash memory will be deleted
w
1
Day of week. 1 for Monday
after this command is sent.
mm
2
Month. 01 for January
dd
2
Day.
yyyy
4
Year.
hh
2
Hour in 24 hour format.
MM
2
Minutes.
jjj
3
Julian data.
Example:
<STX>A5100720001230287
This command sets Friday Oct. 7th, 2000, 12:30, the 287 of
the year.
13
14