Download Deliverable D11: Software Tool Risk Analyzer (beta)

Software Tool RISK ANALYZER (beta) - User manual
EIE-06-078 - Gasification Guide
4.4. Definition of units (for each function)
Every function consists of units (i.e. plant parts). The defining procedure is
1. Click on the respective function for which the unit should be defined (e.g. “Gas
Scrubbing and Transport”) in the project tree
2. Click “New Unit” (control area of function window - bottom left)
3. Create new unit
4. Assign name and code (at least)
5. Press “Save Data”
This is shown for the function “Gas Scrubbing and Transport” in Fig. 6, where the following
units were defined exemplarily:
• Quench
• Scrubber Tank
• Packing material
• Scrubbing column
Fig. 6: Definition of units for the function “Gas Scrubbing and Transport” (exemplarily)
Revision 1.0
DRAFT VERSION
11/25