Download Kinetix Motion Control Selection Guide
Transcript
Kinetix 6200 and Kinetix 6500 Modular Servo Drives Typical Kinetix 6000M Integrated Drive-Motor Configuration This configuration illustrates the use of Kinetix 6200 servo drives with the Kinetix 6000M integrated drive-motor (IDM) system. The IDM power interface module (IPIM) is included in the fiber-optic sercos ring configuration along with the axis modules. Refer to Typical Communication Configurations on page 33 for examples. Modular Drive System (with Kinetix 6000M IDM system) 2094-SEPM-B24-S IPIM Module Three-phase Input Power 2094-BSP2 Shunt Module (optional component) Kinetix 6200 Modular Servo Drive System 2094-PRF Slot Filler Module (required to fill any unused slots) 2094-PRSx Power Rail 2090-K6CK-Dxxxx Low Profile Connector Kits for I/O, Safety, Motor Feedback, and Aux Feedback Bulletin 2090 Network Cables Bulletin 2090 Hybrid Cables To Input Sensors and Control String MDF-SBxxxxx-Qx8xA-S Integrated Drive-Motor Unit Bulletin 2090 Motor Feedback Cables Compatible Rotary Motors, Linear Motors, and Linear Actuators (MPL-Bxxxx motor shown) MDF-SBxxxxx-Qx8xA-S Integrated Drive-Motor Unit MDF-SBxxxxx-Qx8xA-S Integrated Drive-Motor Unit MDF-SBxxxxx-Qx8xA-S Integrated Drive-Motor Unit Bulletin 2090 Motor Power Cables Rockwell Automation Publication GMC-SG001S-EN-P - May 2012 29