Download Kinetix Motion Control Selection Guide

Transcript
Kinetix 6200 and Kinetix 6500 Modular Servo Drives
Typical Kinetix 6000M Integrated Drive-Motor Configuration
This configuration illustrates the use of Kinetix 6200 servo drives with the Kinetix 6000M integrated drive-motor (IDM) system.
The IDM power interface module (IPIM) is included in the fiber-optic sercos ring configuration along with the axis modules.
Refer to Typical Communication Configurations on page 33 for examples.
Modular Drive System (with Kinetix 6000M IDM system)
2094-SEPM-B24-S
IPIM Module
Three-phase
Input Power
2094-BSP2
Shunt Module
(optional component)
Kinetix 6200 Modular
Servo Drive System
2094-PRF
Slot Filler Module
(required to fill any
unused slots)
2094-PRSx
Power Rail
2090-K6CK-Dxxxx
Low Profile Connector Kits for I/O, Safety,
Motor Feedback, and Aux Feedback
Bulletin 2090
Network Cables
Bulletin 2090 Hybrid Cables
To Input Sensors
and Control String
MDF-SBxxxxx-Qx8xA-S
Integrated Drive-Motor Unit
Bulletin 2090
Motor Feedback Cables
Compatible Rotary Motors,
Linear Motors, and Linear Actuators
(MPL-Bxxxx motor shown)
MDF-SBxxxxx-Qx8xA-S
Integrated Drive-Motor Unit
MDF-SBxxxxx-Qx8xA-S
Integrated Drive-Motor Unit
MDF-SBxxxxx-Qx8xA-S
Integrated Drive-Motor Unit
Bulletin 2090
Motor Power Cables
Rockwell Automation Publication GMC-SG001S-EN-P - May 2012
29