1
Download Data Acquisition Toolbox 2 User`s Guide
Transcript
putvalue Purpose Write values to lines Syntax putvalue(obj,data) putvalue(obj.Line(index),data) Arguments obj A digital I/O object. obj.Line(index) One or more lines contained by obj. data Description A decimal value or binary vector. putvalue(obj,data) writes data to the hardware lines contained by the digital I/O object obj. putvalue(obj.Line(index),data) writes data to the hardware lines specified by obj.Line(index). Remarks More About Writing Values to Lines • You can specify data as either a decimal value or a binary vector. A binary vector (or binvec) is constructed with the least significant bit (LSB) in the first column and the most significant bit (MSB) in the last column. For example, the decimal number 23 is written as the binary vector [1 1 1 0 1]. • If obj contains lines from a port-configurable device, then all lines will be written to even if they are not contained by the device object. • An error will be returned if data is written to an input line. • An error is returned if you attempt to write a negative value. • If a decimal value is written to a digital I/O object and the value is too large to be represented by the hardware, then an error is returned. 12-97
