Download CMS_082581 - Applied Biosystems

Section 3.2 Set up and perform a sequencing run
Control the run
3
Figure 56 Click Run Control to display the Run Control menu for that flowcell.
Run Control commands
IMPORTANT! Do not disturb the SOLiD® 4 Analyzer while in operation and do not
open the flowcell during a pause in the run. Significant perturbations (for example,
opening system parts, vibrations) during the run are detrimental to the results.
Table 11 Run Control commands
Command†
Command is available while the
instrument is…
Stop Run
Running or paused
Reset Current Primer
Paused within Primer Cycle
Change Primer Schedule
Paused
Set Early Pause Point
Running or paused
Change Run Progress Point
Paused
† Certain commands have sub-menus that allow you to control every step in a run protocol.
Applied Biosystems SOLiD® 4 System Instrument Operation Guide
75