Download Wireless Security System INSTALLATION AND PROGRAMMING

3. Programming
In the 9)Wire Devices menu use the
2)Programm W.Dev. sub menu.
33
buttons to select the second
9)Wire Devices
2)Program W.Dev.
ENT
13WIR ---#000000
Device13 name
ENT
Device13 name
1)Device Group
Device13 name
2)Wire Input
ENT
ENT
1)Device Group
N:00
-
2)Wire Input
N:01
-
1
2
3
4
5
6
7
8
9
or
0
1
2
3
4
5
6
7
8
9
or
0
The group and the wire input, from which information will be provided, can be programmed in the 2)Program W.Dev. menu. Use the
buttons to scroll
through all system wire devices. A group and a wire input is individually assigned to each
wire device.
1)Device Group
2)Wire Input
The performance is as described in §3.1.3.
The wire input number is selected in this menu.
As each of the wire inputs supports double zoning, it should be
specified which wire detector will pass information to which wire
input.
Sensor 1 input is connected to terminal Z1 and R 1K is used.
Sensor 2 input is connected to terminal Z1 and R 2, 2K is used.
Sensor 3 input is connected to terminal Z2 and R 1K is used.
Sensor 4 input is connected to terminal Z2 and R 2, 2K is used.