Download Software Quick Start Guide Manual

Windows
9. Check that VC4CB104.INF
has been detected and then
click the [Next >] button.
NOTE
The Windows 98 CD-ROM may also be
required during installation. In this
event, switch CD-ROMs as directed by
the on-screen instructions.
10. When driver installation is
completed, the dialog shown
at right is appears. Click the
[Finish] button.
Windows Millennium Edition (Windows Me)
6. The “Add New Hardware Wizard” dialog opens. Click the
[Next >] button.
NOTE
• It may take a few minutes for the
dialog box shown at right to appear
after USB PC Camera is detected.
• If the dialog box does not appear,
uninstall and then re-install the PC
Camera Driver. (See P.22, 49.)
• The Windows Me CD-ROM may also
be required during installation. In this
event, switch CD-ROMs as directed by
the on-screen instructions.
7. When driver installation is
completed, the screen
shown at right appears. Click
the [Finish] button.
11. FinePixViewer starts up and the “PictureHello” window
automatically opens. Check that the live video image is
displayed in the “PictureHello” window.
✽ If live images are not displayed, installation was not completed successfully.
Refer to “Troubleshooting” (P.59).
8. FinePixViewer starts up and the “PictureHello” window
automatically opens. Check that the live video image is
displayed in the “PictureHello” window.
✽ If live images are not displayed, installation was not completed successfully.
Refer to “Troubleshooting” (P.59).
24
25