Download 6 Machine Options Management

Transcript
Manual
Cube67+ | BN-PNIO
Bit assignment of parameter byte 13
Byte 13
7
6
Cycle Time of I/O Link Port 3 / Channel
06
5
4
3
2
1
0
Multiplicator
0 to 63
This defines what multiplicator multiplies
the time base to obtain the required cycle
time of the I/O link port.
Time base
0 = multiplicator * 0.1ms
1 = 6.4 ms + multiplicator * 0.4 ms
2 = 32 ms + multiplicator * 1.6 ms
3 = 134.4 ms + multiplicator * 6.4 ms
This defines what time base is used to
calculate the cycled time.
Fig, 41 Parameter byte 13 Art. No. 56752
Bit assignment of parameter byte 14
Byte 14
7
6
Local Diagnostic Messages of I/O Link
Port 4 / Channel 07
5
4
3
2
1
0
Local diagnostic messages
0 = report
1 = report only line break
3 = do not report
This defines whether the diagnostics are
reported or not.
0 (Reserved)
0 (Reserved)
0 (Reserved)
0 (Reserved)
0 (Reserved)
0 (Reserved)
Fig, 42 Parameter byte 14 Art. No. 56752
62