Download USER`S MANUAL
Transcript
4. Function Settings (3) How to preserve the humidification-unit part / How to Set Abnormal High & Low Temp. Alarm (4) How to change Centigrade & Fahrenheit How to Set Abnormal Low Temperature Alarm ▶ This function gives notice when incubator temperature is lower than setting temperature because of abnormal ambient temperature decrease. ▶ Adjust abnormal low temp. setting with button. [Default setting : -3°C] or ▶ After setting required value, press button to save. Then, it will go to the next stage,°C & °F change. Abnormal Low Temperature: " LO" will indicated on LCD. (The others, same with abnormal high temp. alarm function.) How to change Centigrade & Fahrenheit ▶ Select °C or °F with or ▶ After selecting °C or °F , press [Default setting : °C] button. button to save. ▶ Press button after choosing Centigrade or Fahrenheit to save what you change, and then set value is blinking after "Trn"(set turning cycle) is displayed for 0.5 second on temp FND for MAX 190 / MAX 380 to go to next stage. For MAX 1000, set value is blinking after "Trn1" (set turning cycle for left-side cradle) is displayed for 0.5 second. How to change Centigrade value to Fahrenheit °C = 5/9 (°F - 32) ※ Just press 49 button if you do not need to change setting. %*(*5"-*/$6#"503