Download Construction Safety Book
Transcript
Fall Protection Scaffolding The design, erection, dismantling or maintenance • To erect long, awkward or heavy ladders, get of scaffolds requires competent people and help to avoid injury from overexertion. trained employees. Therefore, assessing • Avoid setting up ladders in doorways, personnel abilities should be a part of all phases passageways, driveways or any other location of the scaffolding inspection. where they can bestruck or knocked over. • Set the ladder on a firm, level surface. Never • Fall protection is required at heights of 10 feet erect ladders on boxes, carts, tables or other or greater (equipped with guardrails, midrails unstablesurfaces. • Cross bracing on the rear section of a stepladder and toeboards). mustnot be used for climbing unless the ladders • Any employee who performs work while on a scafold should be trained regarding the nature are designed and provided with steps for of the hazardsand controls. climbing on bothfront and rear sections. • Straight or extension ladders should be set one • Electrical hazards; fall hazards and object hazards inthe work area. foot out for every 4 feet up. • Proper use of the scaffold and handling materials on the scaffold • Maximum intended load and the load-carrying capacityof the scaffold • Prior to scaffold erection, a pre-jobsite inspectionshould be performed. • Scaffolds should be erected, moved, dismantled or altered only by experienced and trained employees selected for that work by the competent person. 19