Download Construction Safety Book

Transcript
Fall Protection
Scaffolding
The design, erection, dismantling or maintenance
• To erect long, awkward or heavy ladders, get
of scaffolds requires competent people and
help to avoid injury from overexertion.
trained employees. Therefore, assessing
• Avoid setting up ladders in doorways,
personnel abilities should be a part of all phases
passageways, driveways or any other location
of the scaffolding inspection.
where they can bestruck or knocked over.
• Set the ladder on a firm, level surface. Never
• Fall protection is required at heights of 10 feet
erect ladders on boxes, carts, tables or other
or greater (equipped with guardrails, midrails
unstablesurfaces.
• Cross bracing on the rear section of a stepladder and toeboards).
mustnot be used for climbing unless the ladders • Any employee who performs work while on a
scafold should be trained regarding the nature
are designed and provided with steps for
of the hazardsand controls.
climbing on bothfront and rear sections.
• Straight or extension ladders should be set one • Electrical hazards; fall hazards and object
hazards inthe work area.
foot out for every 4 feet up.
• Proper use of the scaffold and handling
materials on the scaffold
• Maximum intended load and the load-carrying
capacityof the scaffold
• Prior to scaffold erection, a pre-jobsite
inspectionshould be performed.
• Scaffolds should be erected, moved, dismantled
or altered only by experienced and trained
employees selected for that work by the
competent person.
19