Download OPERATING MANUAL

Sound Level Meter
1
2
Trigger Events
Choose from the following settings:
Off
No event triggering
on level
above
Events are triggered at noise levels above the
preset value 2 for the start duration 13 .
on level
below
Events are triggered at noise levels below the
preset value 2 for the start duration 13 .
on ext.
keypress
Events are triggered by external keypress.
3
on level
above
Stop level = Start level
2
- Hysteresis
on level
below
Stop level = Start level
2
+ Hysteresis
14
14
Stop Duration 12
The event stop is triggered when the noise level is lower (or
higher) than the preset value and continues for the preset
duration.
Hysteresis 14
Set the hysteresis to an appropriate value to prevent rapid
switching on and off as the level drifts around the Start
level.
Start [dB]
Set the level at which the triggered event is started.
Start Duration 13
The event start is triggered when the noise level is higher
(or lower ) than the preset value and continues for the preset duration.
Stop [dB]
Set the level at which the triggered event is stopped.
4
Level Selection
Define the level type to be monitored.
57