Download the User Manual

Transcript
10 CHAPTER 3
User Interface & Basics
1.) Input Channel
With the „Input“ pull-down menu you can select the format of the incoming audio signal.
The selected format gets displayed graphically in the room matrix below the pull-down
menu. The level meter including the indicator displays the current volume level of the
incoming audio signal. With „input gain“ you can raise or lower the volume of this signal
even before the modulation of Origami begins.
2.) Slot Selection
Origami contains three different Snapshot Slots (A, B and C). So you can create and save
three independent effect setups for each loaded Origami plug-in.
Of course you can switch between these three Snapshot slots during your session to
compare different effect setups with each other.