Download Contents - Datatek Applications

Transcript
Using Network Builder to Configure Your Network
Starting Network Builder for
Configuration
Network Builder is started by choosing Network Builder from the StarKeeper II
NMS menu on the HP VUE Front Panel. After a few seconds the Network Builder
Control Window is displayed as in the following screen.
Screen 8-1.
Network Builder Control Window
From the Network Builder Control Window, choose the task you wish to complete.
This chapter is based primarily on the Configure menu, which is accessed by
choosing Configure. See Chapter 7 for the administration tasks, which are
accessed from the Options menu and Chapter 9 for the analysis tasks, which are
accessed from the Analyze menu.
Configuration Activity Log
The View menu on the Network Builder Control Window provides access to the
Configuration Activity Log. See the following screen for a sample of the
Configuration Activity Log.
StarKeeper II NMS Graphics System Guide, R10.0, Issue 1
8-3