Download Contents - Datatek Applications

Transcript
Using Network Builder to Configure Your Network
0
Screen 8-31.
M2 Frame Relay Module Configuration Form (cht1)
M2 Frame Relay Module Parameters
Parameter
Description
Download
Server
This field specifies the source of the software to be downloaded to the
module. It must be a valid service address or the local controller.
I/O Board
This setting specifies the type of I/O board to be used for che1 service.
Both a 120-ohm symmetrical pair and a 75-ohm coaxial connection are
supported.
Software
Version
This field is a string of 1 to 14 characters specifying the software
version file name to be downloaded to the module.
If Download Server is controller, standard should be entered as the
file name. If Download Server is not controller, enter the file name of
a valid software release.
StarKeeper II NMS Graphics System Guide, R10.0, Issue 1
8-121