Download Technical Description FORMIGA P 100 Technical Description
Transcript
Technical Description FORMIGA P 100 Laser beam with divergence optics and flat-field lenses - Diameter of focused beam - Divergence ratio - Focal length of flat-field lenses - Aperture of the scanners 1.3 < 0.5 mm 3.5:1 440 mm 20 mm Recoating unit Radial recoating system for the generation of a new powder layer and fed by a powder supply container. An overflow container is not required for FORMIGA P 100 as no excess material occurs. Minimum layer thickness 0.05 mm - Layer thickness variation 0.01 mm Supply container (2 units) - 1.4 Capacity of container about 15 litres each Heating The building process heaters are operated separately for the upper process chamber and the lower unloading chamber. Both heater loops separately are controlled and observed. - 1.5 Area heating 2.4 kW Nitrogen generator NG-3H (integrated protective gas generator with cooling system) The protective nitrogen generator separates compressed air into nitrogen and oxygen. Nitrogen is used for cooling the optics and as a protective gas for the process. Oxygen is allowed to flow into the ambient in order to prevent high nitrogen concentrations from becoming hazardous for the operating personal. - Total air consumption (Vn) - Purity of N2 ca. 10 m³/h > 99 % EOS GmbH - Electro Optical Systems Robert-Stirling-Ring 1 D-82152 Krailling / München FP / 04/16/2007 TD_P100_en.doc 3 / 17 Telefon: Telefax: Internet: +49 (0)89 / 893 36-0 +49 (0)89 / 893 36-285 www.eos.info