Download Swift Elite 4 LITE User Manual

Crossfade Options
The Crossfade Options are focused on determining how the crossfade will act and react during a
show.
Do Not Fade Audio: Disables the crossfader from controlling the audio. (All crossfader audio
level options are ignored).
Crossfade Level: Sets the crossfade level. Default is 87% cross level (adjust to 95% and 4
seconds for a nice dance video crossfade).
Crossfade Overlap Time: The crossfade time setting which can be 1 through 25 and set via
the slider. Default value is 5 seconds.
Engage Player w/ Manual Crossfade: By default if this option is not enabled, when the
crossfade is started manually it simply fades from one deck to the other. To auto engage the
destination deck with a manual crossfade, enable this option.
Do Not Cue (Engage) on Auto Fade: When the crossfader moves over, the deck is stopped.
You must push play to engage the next song to play.
Auto Next on Manual Crossfade: Selects the next track in the playlist and loads it into the
appropriate deck.
Do Not Engage On Empty Playlist: If the Playlist source is empty, the Deck will not continue
to play. Enable this option if you wish to account for this.
Select Random Transition (when Crossfade Completes): When a crossfade completes
either via Manual or Automatic, a new crossfade Visual Effect is selected from random and
prepared for the next fade.
Match BPM (when possible): Will match the tempo according to the BPM values of the song
and will attempt to adjust as near as possible. Be sure to set your cue point (auto crossfade will
start the deck at the selected crossfade time).
Swift Elite 4 User Manual
Copyright © TriceraSoft
- 25 -