Download manual for maxdde

Transcript
Item Words
Item Words are Max-Forth words that respond to DDE items. They are divided into
two types of words: [itemsReceived], that is items that MAXDDE expects a
numeric response from , and [itemsSent], or items that MAXDDE expects to Poke
or Set to a new value.
All [itemsReceived] words must end with a display value response.
: V_1 ( -- ) B000 C@ . ;
Word V_1 will read the contents of address B000 and display the value. Because
this is an item to be received by MAXDDE, MAXDDE expects to receive the
following text string:
V_1 nnn OK<cr><lf>
where nnn is a number or some text. (Remember that Max-Forth echoes the
characters that it receives while interpreting.) The response between the word (V_1
in our example) and the OK can be up to 32 characters in length. The response value
does not have to be a number as shown in the above V_1 example.
All [itemsSent] must expect a value and simply return.
: V_2 ( n -- ) B000 C! ;
When V_2 is run it will set a number into address B000. Because this is an item to
be sent by MAXDDE, MAXDDE transmits the following string:
nnn V_2<cr>
where nnn is a number, and receives back
nnn V_2 OK<cr><lf>
MAXDDE uses the correct echoing back of commands and the presence of OK at the
end of the received message to validate the packet.
8