Download Operation manual

8013 Series
Appendix III
User Manual
Device Setting
1. Brightness adjustment:
Please using the "+" & "-" button to adjust the screen brightness.
2. Device configure:
2-1. RS-232 Baud rate set:
Please hold down the "+" button then connect to the power, it will be show the first
setting screen. Please use the "-" button to adjust options, then using the "+" button to enter
the next set.
2-2. Select command mode:
Please use the "-" button to adjust options, then using the "+" button to enter the
next set.
2-3. Display turn on frame select:
Please use the "-" button to adjust options, then using the "+" button to enter the
next set.
2-4. Set complete:
Please use the "-" button to adjust options, then using the "+" button to choose
save/no save or reset.
13