Download OpenH323 Gatekeeper - The GNU Gatekeeper

Transcript
12. Monitoring the Gatekeeper
71
Format:
DisconnectCall Number
Example:
DisconnectCall 1533
• DisconnectIP Disconnect all calls of an endpoint by IP and call signalling port.
Format:
DisconnectIP IP[:Port]
Example:
DisconnectIP 10.0.1.31:1720
• DisconnectAlias Disconnect all calls of an endpoint by one of its aliases.
Format:
DisconnectAlias Alias
Example:
DisconnectAlias 601
• ClearCalls Disconnect all calls on the gatekeeper.
• GK Show the information of the parent gatekeeper.
• Trace Set the status interface output trace level. It controls which messages are sent to this client:
trace 0 or trace min Only direct responses to commands and reload notications.
trace 1 CDRs, direct responses to commands and reload notications.
trace 2 or trace max Show all (RAS, CDRs, direct responses to commands, reload notications,
etc).
• Debug Only used for debug purpose. Options:
trc [+|-|n] Show/modify trace level.
cfg SEC PAR Read and print a cong parameter in a section.
set SEC PAR VAL Write a cong value parameter in a section.
remove SEC PAR Remove a cong value parameter in a section.
remove SEC Remove a section.
printrm VERBOSE Print all removed endpoint records.
Example:
debug trc 3
debug set RoutedMode H245Routed 1
• Who Show all people on the status port.
• RouteReject Terminate this call on a virtual queue. This command is used as a response to a
RouteRequest event (see below).
Format:
RouteReject CallingEndpointID CallRef
Example: