Download OpenH323 Gatekeeper - The GNU Gatekeeper
Transcript
12. Monitoring the Gatekeeper 71 Format: DisconnectCall Number Example: DisconnectCall 1533 • DisconnectIP Disconnect all calls of an endpoint by IP and call signalling port. Format: DisconnectIP IP[:Port] Example: DisconnectIP 10.0.1.31:1720 • DisconnectAlias Disconnect all calls of an endpoint by one of its aliases. Format: DisconnectAlias Alias Example: DisconnectAlias 601 • ClearCalls Disconnect all calls on the gatekeeper. • GK Show the information of the parent gatekeeper. • Trace Set the status interface output trace level. It controls which messages are sent to this client: trace 0 or trace min Only direct responses to commands and reload notications. trace 1 CDRs, direct responses to commands and reload notications. trace 2 or trace max Show all (RAS, CDRs, direct responses to commands, reload notications, etc). • Debug Only used for debug purpose. Options: trc [+|-|n] Show/modify trace level. cfg SEC PAR Read and print a cong parameter in a section. set SEC PAR VAL Write a cong value parameter in a section. remove SEC PAR Remove a cong value parameter in a section. remove SEC Remove a section. printrm VERBOSE Print all removed endpoint records. Example: debug trc 3 debug set RoutedMode H245Routed 1 • Who Show all people on the status port. • RouteReject Terminate this call on a virtual queue. This command is used as a response to a RouteRequest event (see below). Format: RouteReject CallingEndpointID CallRef Example: