Download Model 700 - Southeastern Automation

Transcript
INSTALLATION AND SETUP
MODEL 700
3-1
INSTALLATION AND SETUP
3-
This section provides instructions for installing
and setting up the Model 700 Gas
Chromatograph (GC) System for Zone 1/
Division I environments.
This procedure involves the following steps:
•
•
•
•
•
•
•
•
•
3.1
observe precautions and warnings
plan site location
obtain supplies and tools
install GC wiring
install GC sample and gas lines
perform leak checks
purge carrier gas lines
purge calibration lines
start up GC system
PRECAUTIONS AND WARNINGS
DANGER TO PERSONNEL AND EQUIPMENT
Install and operate all equipment as designed and is
compliant with all safety requirements.
The “Seller” does not accept any responsibility for
installations of the Model 700, or any attached
equipment, in which the installation or operation
thereof has been performed in a manner that is
negligent and/or non-compliant with applicable safety
requirements.
SEP 2005
Precautions and Warnings