Download GUI Graphical User Interface: Rail Switch Power Lite (RSPL)

Switching
5.4.3
5.4 IGMP
IGMP Querier
The device allows you to send a Multicast stream only to those ports to which
a Multicast receiver is connected.
To determine which ports Multicast receivers are connected to, the device
sends query data packets to the ports at a definable interval. If a Multicast
receiver is connected, it joins the Multicast stream by responding to the
device with a report data packet.
This dialog allows you to configure the Snooping Querier settings globally
and for the VLANs that are set up.
 Operation
Parameters
Operation
Meaning
Activates/deactivates the IGMP Querier function globally in the device.
Possible values:
 On
 off (default setting)
Table 149:"Operation" frame in the Switching:IGMP:Querier dialog
 Configuration
In this frame you define the IGMP Snooping Querier settings for the
general query data packets.
Parameters
Protocol Version
Query Interval
Meaning
Defines the IGMP version of the general query data packets.
Possible values:
 1 (IGMP v1)
 2 (IGMP v2, default setting)
 3 (IGMP v3)
Defines the time in seconds after which the device generates general
query data packets itself when it has received query data packets from the
Multicast router.
Possible values:
 1..1800 (default setting: 60)
Table 150:"Configuration" frame in the Switching:IGMP:Querier dialog
170
RM GUI RSPL
Release 2.0 02/2013