Download GPRS ADAPTER

"User ID": has to be the same as the user ID set in the alarm control panel
"Contact-ID event codes":
• "IN1 contact": If input IN1 is activated, an event with the given event code will be
generated. By default this input is NO (normally open), but can be set to NC as well
by ticking „IN1 is normally closed (NC)”. It is also possible to report the
restoration of the input by turning on „Report IN1 restore as well” option.
• "PSTN fault": in case of PSTN fault an event with the code given here will be
generated. If there is no PSTN line, leave this field blank.
• If settings are finished, press „Store changes” then „-> Write parameters to
module” button.
• With the help of „>>” button in the main window, a detailed tracking window can be
opened where the module’s operation, the dialed number, Contact-ID signals, etc.
can be monitored.
14