Download DT9826 Datasheet - Fabrimex Systems AG

Accessories
Ordering Information
The following optional accessories are available for use with the DT9826 module:
■
■
■
■
■
■
EP353 – Accessory panel. Provides one 37-pin connector and one 26-pin
connector for attaching analog input signals. Used with the STP37 and
EP360. (For OEM configurations only.)
EP355 – This screw terminal panel provides a 14-position screw terminal
block for attaching analog input, digital I/O, counter/timer, and clock signals.
(For OEM configurations only.)
EP356 – This accessory panel provides two 37-pin, D-sub connectors for
attaching analog ouput, digital I/O, counter/timer, tachometer, and trigger
signals. Used with the STP37 and EP333. (For OEM configurations only.)
STP37 – This screw terminal panel allows connections to analog input, digital
I/O, counter/timer, tachometer, and trigger signals from the EP353 or EP356
accessory panel. (Can be used with -BNC and -OEM versions.)
EP333 – 2-meter shielded cable with two 37-pin connectors that connect an
EP356 accessory panel to an STP37 screw terminal panel. (Can be used with
the -BNC and -OEM versions for DIO and C/T connections.)
EP360 - 2-meter shielded cable with two 37-pin connectors that connect an
EP353 accessory panel to an STP37 screw terminal panel. (Can be used with
the -BNC and -OEM versions for analog input connections.)
EP353
STP37
EP356
EP333
Figure 9. The EP333 cable, along
Figure 10. This example shows an EP353 accessory
with the STP37, allow screw terminal panel, which plugs into connector J2, and an EP356
connections to the EP356 (shown
accessory panel, which plugs into J3.
below).
Figure 11. With the optional DIN rail mounting kit
(BNC-DIN-RAIL-KIT), you can mount the DT9826 BNC
model to a standard DIN rail.
All Data Translation hardware products are
covered by a 1-year warranty. For pricing
information, please visit our website or
contact your local reseller.
Hardware
■ DT9826
■ DT9826-OEM
Accessories
■ BNC DIN Rail Kit – Kit for mounting USB
modules in BNC enclosure to a DIN rail.
Includes mounting clips, screws, and
instructions. DIN Rail not included.
■ EP333 – 2-meter shielded cable for the
EP356 and STP37
■ EP353 – Accessory panel with one 37pin connector and one 27-pin connector
■ EP355 – Screw terminal panel
■ EP356 – Accessory panel with two 37pin, D-sub connectors
■ EP360 – 2-meter shielded cable for the
EP353 and STP37
■ STP37 – Screw terminal panel
Software
The following software is available for
purchase separately:
■ Measure Foundry (SP1300-CD) – Test
and measurement application builder
for Windows® XP, Vista, Windows 7.
■ quickDAQ (SP8501-CD) – Highperformance, ready-to-run application
that lets you acquire, plot, analyze, and
save data to disk at up to 2 MHz per
channel.
■ LV-Link – Access the power of Data
Translation boards through LabVIEW™.
Free Software Downloads
The following software is available for free
download from our website:
■ DAQ Adaptor for MATLAB – Access the
analyzation and visualization tools of
MATLAB®.
■ Measurement Applets
For more information about the DT9826, including specifications,
please visit: http://www.datatranslation.com/info/DT9826/
Copyright © 2011 Data Translation, Inc. All rights reserved. All trademarks are the property of their respective holders.
Prices, availability, and specifications are subject to change without notice.
www.datatranslation.com
US/Canada (800) 525-8528
Europe/Asia +49 (0) 7142-9531–0