Download Comdial DX-80 User Guide

line. The same system hold line will flash the red lamp at all other
extensions.
Operation
1.
While on a line, the green lamp for that line is I-Use flashing (double
wink rate).
2.
Press
. The green lamp now flashes at a slow rate and the call
is placed on System Hold.
Hold – Exclusive
'
When using the feature button and the hold button together, you may place
an outside call on private/exclusive hold. The held line will appear in use at
other extensions.
Operation
While connected on an outside line, press ' and then press
.
Hold Reminder
The system provides a programmable timer to remind you that a call has
been left on System or Exclusive Hold. When Hold Reminder is enabled,
you will hear one ring tone repeated each time the selected time expires.
Holding Call Answer – Select
Holding Call Answer allows you to place call on hold and retrieve calls from
hold by simply pressing the
button. When multiple calls are holding
at an extension, Holding Call Answer will access the outside line that has
been holding the longest while placing the current call on hold.
Holding Call Answer works for all outside lines regardless of the extension
outside line button programming. It is possible to handle calls that do not
appear (no button) at an extension via Holding Call Answer.
Operation
1.
2.
When one or multiple calls are holding at your extension, press
The oldest holding call is connected.
3.
Press
4.
5.
again to answer the next oldest holding call.
Press
Repeat as required for any calls on hold at your extension.
.
again to place this call on hold.
DX-80 Digital Executive Telephone User Guide
Page 21