1
Download 1 - Gomaro
Transcript
To run the On-Demand test: 1. From the Sensors sub-menu, scroll with the arrow keys until you highlight On-Demand. Press e. If the sensor is clear, you will see: On Demand = ### Clear Values must be less than 288. If sensor is blocked, you will see: On Demand = ### Blocked Values must be greater than 480. If the value is invalid, make a note and call Service. 2. Press b to exit. The values displayed may fluctuate on the screen. 7-14 Using Diagnostics TC6035EZEM Rev. C 10/98
