1
Download R&S UPP Audio Analyzer
Transcript
R&S®UPP Remote Control - Command Description Distortion Measurements SENSe<n1>:FUNCtion:REFNment <refnment> Parameters: <refnment> N1 | N2 | N4 | N8 SENSe:VOLTage:EQUalize <state> Parameters: <state> ON | OFF 7.10.2 THD ● SENSe<n1>:FUNCtion on page 687 ● SENSe:FUNCtion:DISTortion<n3> on page 693 ● SENSe:FUNCtion:MMODe on page 688 ● SENSe:VOLTage:FUNDamental on page 693 ● SENSe:VOLTage:FUNDamental:MODE on page 693 SENSe:FUNCtion:DISTortion<n3> <state> select the desired even or odd harmonics for THD measurement mode LSELectdi. The measurement mode is selected with command .SENSe:FUNCtion:MMODe on page 688. Suffix: <n3> Parameters: <state> Example: . 2 | 3| 4 | 5 | 6 | 7 | 8 | 9 designates the harmonics to be used ON | OFF SENSe:FUNCtion THD SENSe:FUNCtion:MMODe LSELectdi SENSe:FUNCtion:DISTortion2 ON SENSe:FUNCtion:DISTortion4 ON SENSe:FUNCtion:DISTortion7 ON The distortion voltage of harmonics d2, d4 and d9 (root from the squared sum of the selected harmonics) is measured. SENSe:VOLTage:FUNDamental <fundamental> Parameters: <fundamental> float SENSe:VOLTage:FUNDamental:MODE <mode> Parameters: <mode> User Manual 1411.1055.32 ─ 03 AUTO | GENTrack | SOURce | VALue | FIXed 693
