Download USER`S MANUAL

Introduction
Environmental Specifications
ENVIRONMENTAL SPECIFICATION
THERMAL
Air-cooled
610E
620LE
620UE
Extended air-cooled
610E
620LE
620UE
Conduction-cooled
All
HUMIDITY
SHOCK
VIBRATION
5 - 2000 Hz
EMISSIONS
IMMUNITY
OPERATING
NON-OPERATING
Air-cooled
0° to 55°C1 w/ 200 lfm airflow
0° to 65°C1 w/ 200 lfm airflow
0° to 70°C1 w/ 200 lfm airflow
Extended air-cooled
-20° to 60°C2 w/ 200 lfm airflow
-20° to 70°C2 w/ 200 lfm airflow
-20° to 75°C2 w/ 200 lfm airflow
Conduction-cooled
-40° to 85°C3
(measured at board/heatsink rail)
20% - 80% RH, non-condensing
30 g peak acceleration, 11msec
duration
0.015” (0.38mm) peak-to-peak
displacement, 2.5 g maximum
acceleration
EN 55022
EN 50082-2
Air-cooled
-40° to 85°C
Extended air-cooled
-40° to 85°C
Conduction-cooled
-55° to 105°C
50 g peak acceleration, 11 msec
duration
0.030” (0.76mm) peak-to-peak
displacement, 5 g maximum
acceleration
1
Designed to meet these temp specifications regardless of system utilization (without PMC/XMC installed). Lesser system utilization and/or higher
airflow may allow higher operating temp, although in no case should 85°C be exceeded. CPU temp should be closely monitored for max junction
temp of 105°C using a program such as Argus Monitor if exceeding the temps stated here.
2
Every board tested to ensure these temp specifications regardless of system utilization (without PMC/XMC installed). Lesser system utilization
and/or higher airflow may allow higher operating temp, although in no case should 85°C be exceeded. CPU temp should be closely monitored for
max junction temp of 105°C using a program such as Argus Monitor if exceeding the temps stated here.
3
Every board tested to ensure these temp specifications. Tested under Windows 7 with Passmark BurnInTest version 5.0, running CPU, Memory,
and 3D Graphics tests simultaneously. During application testing CPU temp should be closely monitored for max junction temp of 105°C using a
program such as Argus Monitor if exceeding measured rail temp of 70°C (thermocouple inside provided heatsink hole).
Hardware Specifications
CHARACTERISTIC
POWER
Intel® i7-610E Processor (8GB)
Intel® i7-620LE Processor (8GB)
Intel® i7-620UE Processor (4GB)
VOLTAGE
CPU SPEED
Intel® i7-610E Processor
Intel® i7-620LE Processor
Intel® i7-620UE Processor
ONBOARD MEMORY
Intel® i7-610E Processor
Intel® i7-620LE Processor
Intel® i7-620UE Processor
GRAPHICS CONTROLLER
SPECIFICATION
+5V: 9.1A (typical); 12.8A (maximum)
+5V: 7.5A (typical); 10.8A (maximum)
+5V: 6.5A (typical); 9.4A (maximum)
+5V, +12V, -12V; all +5%/-2.5% (Only +5VDC required)
2.53 GHz, dual-core
2.0 GHz, dual-core
1.06 GHz, dual-core
INTEGRATED SATA-300 CONTROLLER
INTEGRATED NAND FLASH SSD
8GB dual channel DDR3 ECC @ 1066 MHz
4GB or 8GB dual channel DDR3 ECC @ 1066 MHz
4GB dual channel DDR3 ECC @ 800 MHz
Intel® Integrated HD Graphics
2048 x 1536 max resolution, 32-bit color max (VGA)
1920 x 1200 max resolution, 32-bit color max (DVI-D)
Intel® 82580EB Quad Port 10/100/1000Base-TX Gigabit
Ethernet
SATA0 and SATA1 via P2
8GB on SATA4
ON-BOARD SATA DRIVE
One 1.8" SSD drive on SATA2 via optional XBRD-9050 module
ETHERNET CONTROLLER
1-4