Download 5000

®
SCAMAX 5000
To replace the feed belts, pull the
old, worn out belts to the left of
the rollers. To this end, lift the
roller facing you slightly. This
also allows the feed belts to be
removed easily from the rear
roller.
Follow the procedure in the reverse order to put the new belts on one after another. Align
them by turning the rollers. Then the belts centre themselves automatically.
Reattach all covers and all panelling parts in reverse order:
First place the light barrier support on its centring pins and tighten the knurled nuts.
Then replace the feed mechanism cover plate and secure it with the two recessed head
screws.
Afterwards the front panel can be replaced. During mounting, take care that the shape of the
panel conforms with the housing contour. After mounting, push the panel downwards until
it stops.
35