Download Setup - Artisan Technology Group

Installing Add-On Scanners
Each Add-On Scanner provides an additional 128 test points. You can connect up to seven
Add-Ons to your tester for a total of 1024 points.
1. With the tester turned off, use a
coin or screwdriver to turn the
fasteners on the removable J1-J2
cover plate to the horizontal
position.
J1-J2 Cover Plate
Horizontal
Position
Note: The only time to remove the J1-J2 cover plate is when attaching an Add-On Scanner.
J3-J4 Cover Plate
2. Turn the fasteners on the removable
J3-J4 cover plate to the horizontal
position.
Horizontal
Position
3. Remove both cover plates from
the tester.
4. Carefully remove the scanner
assembly, turn it upside down,
and put it next to the tester.
Scanner
Assembly
Setup
6