Download User`s Manual - Atel Electronics

The User’s Manual for GEA-8120A
4.3.6 Insert
Insert sitting use to choice which port will be used to insert and type of insert. As
shown in Figure 4.3.6.
Figure4.3.6 Insert Setting
[Insert]: Insert Types: FCS error, IP Header error, PAUSE frame.
1. [FCS Err]: Can choose the insert modes, manual or automatic proportion insert.
When choose manual insert, you need to input the number; when choose automatical
proportion insert, you need choose send proportion;
2. [IP Header Err]: Can choose the insert modes, manual or automatic proportion insert.
When choose manual insert, you need to input the number; when choose automatical
proportion insert, you need choose send proportion;
3. [PAUSE Frm]: insert Pause length, the range is 0 ~ 65535, the unit is sending 512bit
data
time. If choose insert single PAUSE frame, time interval is invalid, click once
[insert PAUSE], inset one PAUSE frame; if you choose continuous insert, time interval
is valid, you can set two PAUSE frame time interval, ranging from 0 to 16777215, the
unit is same to the PAUSE length.
In half-duplex mode, it is not allowed to insert a PAUSE frame.
4.4 Rx Para
It is used to set the parameters of receiving filtering. Include: parameters summary,
www.lzdd.com
21