Download Ht60B Users manual

2.3 Basic mode
The controller is in Basic mode when powered up (the initial set-up must be performed, see page 23 ).
On upper display process value is shown, on lower display there is stp value.
On
upper
display
process value is shown
On lower display
stp value is shovn
•
•
•
When in manual operation there is output power in % shown on lower display and heading Man.
If there is any other heading on lower display, the controller is not in basic mode, parameters are set or viewed.
Information and error messages are indicated only in basic mode.
Return to basic mode
•
•
6
To return to basic mode press shortly the keys
.
If there is no key pressed for 60 seconds, the controller itself returns to basic mode.