Download User manual
Transcript
XII. SOFTWARE MANUAL Figure 17. Laser control window (after changing each value press Enter to make the change). 1 2 3 4 emperature for laser diode. Accuracy: 1. Setting of temperature O 0.1 C. Range: 10.0O C to 50.0O C 2. Temperature stabilization speed parameter. Range: Range 1 to 20. For slower lower temperature stabilization set greater value. This is necessary when temperature is oscillating. Value of 5 should be suitable for most standard systems. 3. Current limiting for laser diode TEC. Range: Range 1.1 A to 4 A, accuracy 0.004A. 4. Current and temperature display at the moment. 5 5. Voltage limit for laser diode. Accuracy: Accuracy 0.001V. Range: 1.500V to 3V. NOTE: This value always must be greater than laser diode operating voltage in case of voltage drop in wires. Figure 18. LD temperature control and voltage limit control. control Information is subject to change without notice Copyright 2012 21