Download iNodeConfig iC User Guide
Transcript
iNodeConfig iC User Manual TP alarms - These are alarm settings for the tubing pressure. High and low levels can be set to trigger a soft alarm (ACiC alarms only) or shut in (ACiC alarms and shuts in enabled valves). Table 40. TP Alarms Item Tubing pressure high alarm Tubing pressure high shut in Tubing pressure low alarm Tubing pressure low shut in 9/15/2008 Description High setpoint for the tubing pressure at which the ACiC will enter the alarm state. High setpoint for the tubing pressure at which the ACiC will shut in and enter the alarm state. Low setpoint for the tubing pressure at which the ACiC will enter the alarm state. Low setpoint for the tubing pressure at which the ACiC will shut in and enter the alarm state. Version 1.0.0 Page 53