Download KIP 3000 - NovaCopy

AutoRecognize=c:\programs\DS\MAD.exe
PowerScriptExe=c:\programs\DS\pscript.exe
KipPortExe=C:\Programs\KawPDFT.Exe
RecallDir=C:\Programs\Recall
TempDir=C:\Programs\TR
MiniSize=1000,720
Units=ENGLISH (English or Metric units)
AddHpglCmd=
Values are software switches, used to apply custom commands to HPGL/2
files. This line may contain one switch, multiple switches, or none. Some
switches are specific to certain versions; some are specific to certain printer
models. Switches are case-sensitive. Some switches have a value after the
switch, separated by a space. Multiple switches are separated by a space.
You may see some of the following:
-D 300
-G
-Y
-Z
Forces raster images to 300 DPI, to compensate for raster images
looking ‘squished’ or out of place on some files created with HP
drivers.
Affects grayscale level of embedded raster images. This feature is
now built into the Request Pen Table. Value (1-100)
KIP 8000-specific.
KIP 8000-specific.
An example of how multiple switches might appear in the line:
AddHpglCmd=-D 300 –G 50
DebugVal=999
Used for diagnostic purposes only.
MP=à‘Þ •àƒ„—…000000
The encrypted master password as set by the installer
ST=00
10-44
Section 10
KIP Request