Download click - CADian

4. Circular Continuous Text
This command draws a text in a circle direction with the incremented value of the
number included in the text.
<Drawing1>
Command : PINCTEXT
a point.
Select Text : Select the number by selecting ○
Select Entity : Press Enter Key.
Incremental Value <1> : Enter “1”.
Digits <1> : Enter “1”.
Placement of Number[Front/Back]: Enter “F”.
b point. (Select the center point of the circle by using
Center Point : Select ○
OSNAP<“CEN”>.)
Column [Angle/Rotate] <4>: Enter “12”.(Enter the number of the rotation copy.)
Draw Angle [Rotate] (+=CCW, -=CW) < 360 >: Enter “R”.
Draw Angle [Rotate] (+=CCW, -=CW) < 360 >: Enter “360”.
<Drawing2>
If “?” is included in the text, “?” can be incremented by changing it to the numerical
value. If both “?” and number are included, “?” is ignored and only number is
incremented.
Command : PINCTEXT