Download click - CADian

Select Entity : Press Enter key.
Incremental Value<1> : Enter “2”.
Digits<1> : Enter “2”.
Placement of Number[Front/Back] : Enter “F”.
b point.
Base Point : Select ○
Space : Enter “1000”. (Distance can be entered by using a mouse)
c point.(If dragging the crosshair to the right, the incremented text
Position : select ○
appears with 1000 space value. Text appears and text is created automatically after a
point is selected.)
<Drawing2>
If drawn text includes “?”, “?” can be switched to number and text is incremented. If
“?” and number are included at the same time, “?” is ignored and only number is
incremented.
Command : LINCTEXT
a point.
Select Entity : Select the text by selecting ○
Select Entity : Press Enter key.
Incremental Value<1> : Enter “2”.
Digits<1> : Enter “2”.
Placement of Number[Front/Back] : Press Enter key.
b point.
Base Point : Select ○
Space : Enter “1000”. (Distance can be determined by using a mouse)
c point.( If dragging the crosshair to the right, the incremented text
Position : Select ○
appears with 1000 space value. Text appears and text is created automatically after a
point is selected. If a number is included in the text, then “?” is ignored and only
number is incremented.)