Download click - CADian

Command: DRECT
Dialog/<Start Point> : Enter “D”. (invoke a dialog.)
a point.
Dialog/<Start Point> : Select ○
b point.
Dialog/<Start Point> : Select ○
c point.
Dialog/<Start Point> : Select ○
2. Drawing Polygons
This command draws polygons with a function of fillet and chamfer automatically.
Command: PGON
Number of sides <5> : Enter “5” or press Enter key. (Enter a number of sides for the
preferred polygon.)
Polygon Start Point or [Fillet/Champer] : Enter “F”.
Polygon Fillet Radius <0.0000> : Enter “5”. (Enter the radious value for the fillet.)