Download MULTIPATH IP USER MANUAL
Transcript
Scenario: There are two exclamation marks ( ) next to two items: Search Click this button to display the results in the results window. It is important that all items are ticked ( ) in the status column. This indicates that the server communication paths are working, the server services are working and the alarm Automation System is connected and working properly. A blue cross ( ) indicates that the item is not used or not configured for use. If you have an orange exclamation mark ( ) or red cross ( ) then you should investigate further as to exactly what the problem is. MESSAGE VIEW in the toolbar To open the STU message view, click on the STU then click on the View STU Messages ( Search Parameters The search parameters consist of Date & Time Client Identity Message Direction Paths Message Types Client Identity Indicates what messages will be displayed according to what is checked To view the system status click on the System Status Message Direction Filters that can show messages from or to the Stu, or From or to the Automation system SYSTEM STATUS Paths Filters that can show messages from particular paths, either Ethernet or GPRS 19. Click Save Changes when you’re completed. 20. Click Write Programming to write the programming to the STU. Message types Filters than demonstrate particular messages from the STU, Events, Commands, Path Changes etc. Including Server messages such as processor status, receiver status, etc. Live Updates As events occur the results window can be automatically updated. 17. Enter a name for the user. 18. Enter a PIN code for the user. ) button. By clicking on the two plus ( ) icons to the left of the items, we can see more detail: Tool bar The tool bar buttons: Clear Message Window Print Messages Copy Messages Show messages sent to the Automation System Live Update. Multipath IP User Manual Version 5.0 Results Window Page 50 © Inner Range PTY LTD Columns that can be displayed are: •Client Code •Date Time •Direction •Event Type •Message Text •Path •Raw Message Data •Remote Endpoint •Rx ID •STU ID Multipath IP User Manual Version 5.0 Record Count Displays the total number of records displayed. We can see that two receiver connections are either not used or not configured. This is ok ( ). Also, there is no connection to the alarm automation system ( ). This should be addressed immediately! Page 51 © Inner Range PTY LTD