Download EFCM Basic User Manual (v9.0.0)

Configuring the IP Access Control List
6
Editing the List
Use the edit functionality of the Switch IP Access Control List to
remove an entry from the list and replace with an updated entry. Edit
an entry by selecting an entry on the Switch IP Access Control List and
selecting the Edit button. The selected entry is populated to the
Add/Edit Members dialog. Specify a new entry as described in Adding
New Members to the List on page 6-16.
Deleting Members
from the List
Delete members from the Switch IP Access Control List using the Delete
and Delete All buttons.
NOTE: If the host IP address is selected or included in the selected range,
deletion may cause the interface to become inaccessible.
To delete a single IP address or a range, select the desired item from
the list. Select the Delete button. The deletion takes effect immediately
on the fabric.
Or you can delete the entire list, by selecting the Delete All button. The
change takes effect immediately on the fabric.
Configuring Security
6-17