Download Operation Manual

Configuration Menu～Synchronizing Image and Time Code
《Set Frame Loss Information》
Frame loss is the phenomenon of losing 1-2 frames when encoding a video into MPEG-1.
When there is some frame loss, the time code is shifted even though you adjust the time code by
the standard setting, so you need to adjust.
1. Go to Configuration, click Synchronize Image and Time Code and select Set Frame Loss
Information.
2. Enter the time code of a
dropping frame, and click
OK.
When the frames are overlapped, set the each frame one by one as above.
《Clear Configuration Information》
This function cancels the time code adjustment previously applied.
This is used when you use a new image file for an existing project file,which has been
adjusted many times due to dropping frames.
1. Go to Configuration, click Synchronize Image and Time Code and select Clear
Configuration Information.
2.When the message, “Reset the time code. OK?” is displayed, click OK.
When you click OK, the image is closed. If you want to open the image, choose Open image from
File menu.
73