1
Download Spectrum Analyzer
Transcript
REMOTE CONTROL
INITiate Commands
:INITiate:CONTinuous ..................................................... 131
:INITiate[:IMMediate]........................................................ 131
Set
:INITiate:CONTinuous
Query
Description
Sets the sweep mode to continuous or single mode
or queries its state.
Syntax
:INITiate:CONTinuous {OFF|ON|0|1}
Query Syntax
:INITiate:CONTinuous?
Parameter
0
1
OFF
ON
Return parameter 0
1
Example
single
continuos
single
continuos
single
continuos
:INIT:CONT ON
:INITiate[:IMMediate]
Set
Description
Initiates an immediate single sweep then stops the
sweep.
Syntax
:INITiate[:IMMediate]
Example
:INIT
131
