Download User manual - Mars
Transcript
User's Manual 12 Warranty Claim In the event of any Device’s failure or defect in manufacture or material during the warranty period (provided that the transportation, storage and operating conditions outlined in this Manual are fulfilled), send the Device to Mars-Energo along with the Warranty Claim containing the following information: Device’s Model and Serial number; Date of manufacture; Date of putting the Device into operation; Condition of the manufacturer’s seals (in place, destroyed, absent); Description of the failure or defect; Customer's address and contact phone number. 13 Calibration Procedure IHC-____________ serial N__________________ Device’s calibration procedure shall be carried out in compliance with the calibration methods established by D.I. Mendeleev Institute for Metrology (VNIIM, SaintPetersburg, Russia). The Device undergoes primary post-manufacture calibration, and then it is calibrated after each repair. Regular calibration is performed during operation. A period of two calendar years is considered maximum time between calibrations. Date of Calibration 14 Type of Calibration Calibration results Calibrator's Signature